Vol 3 No 6 (2011): Physics and physical computing / Fizika ir fizinė kompiuterija
Published: 2012-01-03
Article
Efficiency research on meat industry waste water treatment applying the method of dissolved air flotation
Abstract 478 | PDF Downloads 504 | DOI https://doi.org/10.3846/mla.2011.100
Page 5-7
Damping transversal vibrations of the offset cylinder of the offset press
Abstract 488 | PDF Downloads 402 | DOI https://doi.org/10.3846/mla.2011.101
Page 8-11
Research on the quality of figure cutting
Abstract 457 | PDF Downloads 292 | DOI https://doi.org/10.3846/mla.2011.102
Page 12-14
Research on the accuracy of angle measurement
Abstract 453 | PDF Downloads 364 | DOI https://doi.org/10.3846/mla.2011.103
Page 15-18
The utilization of the creativity of engineering personnel in industrial
Abstract 473 | PDF Downloads 508 | DOI https://doi.org/10.3846/mla.2011.104
Page 19-24
Research into automobile movement on a curve under winter conditions
Abstract 488 | PDF Downloads 522 | DOI https://doi.org/10.3846/mla.2011.105
Page 25-28
Metallographic investigation into the aluminothermic welding of rail joint R65
Abstract 461 | PDF Downloads 406 | DOI https://doi.org/10.3846/mla.2011.106
Page 29-33
Investigation into the structure and corrosion resistance of Mg-Al and Mg-Al-Zr coatings produced by magnetron sputtering
Abstract 485 | PDF Downloads 322 | DOI https://doi.org/10.3846/mla.2011.107
Page 34-38
Analysis of a flat-plate solar collector
Abstract 737 | PDF Downloads 616 | DOI https://doi.org/10.3846/mla.2011.108
Page 39-43
Investigation into the quality of UV varnishing
Abstract 446 | PDF Downloads 376 | DOI https://doi.org/10.3846/mla.2011.109
Page 44-46
Multi-objective optimization of grillages applying the genetic algorithm
Abstract 459 | PDF Downloads 383 | DOI https://doi.org/10.3846/mla.2011.110
Page 47-52
Research and formation of the whirling vortex of the jet pump
Abstract 478 | PDF Downloads 355 | DOI https://doi.org/10.3846/mla.2011.111
Page 53-55
Investigation into negative-stiffness vibroisolation table “Minus K 500BM-1”
Abstract 440 | PDF Downloads 294 | DOI https://doi.org/10.3846/mla.2011.112
Page 56-60
An increase in the competitiveness of industrial enterprises in the process of developing innovation practices
Abstract 483 | PDF Downloads 332 | DOI https://doi.org/10.3846/mla.2011.113
Page 61-66
Some inaccurate uses in papers on welding
Abstract 448 | PDF Downloads 1065 | DOI https://doi.org/10.3846/mla.2011.114
Page 67-70
Investigation into tt technological properties of coolants with liquid crystal additives
Abstract 466 | PDF Downloads 345 | DOI https://doi.org/10.3846/mla.2011.115
Page 71-74
Research into thermal sprayed coatings with ultrasonic methods
Abstract 465 | PDF Downloads 326 | DOI https://doi.org/10.3846/mla.2011.116
Page 75-78
Numerical modeling of a precise dual axis positioning system
Abstract 498 | PDF Downloads 317 | DOI https://doi.org/10.3846/mla.2011.117
Page 79-81
Research on the effectiveness of cleaning cutting fluid used for machining during abrasive and diamond tools operations
Abstract 507 | PDF Downloads 340 | DOI https://doi.org/10.3846/mla.2011.118
Page 82-84
Metalų oksidų ir jų mišinių panaudojimas kintamo lūžio rodiklio optinėms dangoms formuoti
Abstract 542 | PDF Downloads 971 | DOI https://doi.org/10.3846/mla.2011.119
Page 85-90
Control over the performance of monocrystalline silicon solar cells referring to the porous silicon layer
Abstract 484 | PDF Downloads 548 | DOI https://doi.org/10.3846/mla.2011.120
Page 91-94
Effects of thermodynamical processes on radiocesium behavior in lake tapeliai
Abstract 471 | PDF Downloads 410 | DOI https://doi.org/10.3846/mla.2011.121
Page 95-100
Investigation into superconducting Y-Ba-Cu-O films containing regions of weak superconductivity and biased at I >> IC
Abstract 447 | PDF Downloads 369 | DOI https://doi.org/10.3846/mla.2011.122
Page 101-104
Coherent vortex motion in Yba2cu3o7-Z superconducting thin films containing Π-shaped channel for easy vortex motion biased at I ~ IC
Abstract 471 | PDF Downloads 353 | DOI https://doi.org/10.3846/mla.2011.123
Page 105-110